We will send the latest version of product, the upgraded function. It may has different shape or color. If you can’t agree, pls don’t buy. Pls choose available tracking info shipping method, never ask a tracking number if your shipping method is not available.
- Large current 5A constant current LED driver lithium-ion battery power supply module
- 5A constant voltage constant current module
- When you use this product, the module inputs and outputs to the ground and do not co-together, this will cause the board power current sense resistor is bypassed, so that the module can not adjust the output current size, the case then load easy to burn power chip module.
- This module is easy to use, powerful! ! !
- A module has three major features to meet most of your occasions! ! !
- Module Description:
- 1. high power, high efficiency, 5A, low ripple;
- 2. triple:
- (1) Use as a normal blood pressure modules with overcurrent protection capability;
- (2) as the various voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery) charger for solar panels, wind turbines and other occasions;
- (3) is used as a high-power LED constant current drive module;
- 3. With constant pressure and constant current modes, there are light indicates which mode is currently in module;
- 4. When used as a lithium battery charger, you can set the float voltage and the charge current size, there is light indicates is being charged or has been filled;
- 5. Has the current limit protection, output short circuit even if it will not burn module.
- 6. This module uses machine placement, reflow soldering, and each module shipments have been two hours before the aging tests to ensure high reliability.
- Input: IN + input positive, IN- input negative
- Output way: OUT + output positive, OUT- output negative
- Input voltage: 4-38V
- Output voltage: 1.25-36V continuously adjustable
- Output current: adjustable, maximum 5A
- Output Power: 75W maximum
- Working temperature: -40 to + 85 degrees
- Operating frequency: 180KHz
- Conversion efficiency: up to 96%
- Short circuit protection: Yes (limit current 8A)
- Overtemperature protection: (automatically shut off the output after overtemperature)
- Input reverse polarity protection: None, (if necessary, please enter the string into the high current diode)
- Installation: four 3mm screws
- Module dimensions: length 51mm width 26mm height 15mm
- 1. Use as a normal blood pressure modules with overcurrent protection capability
- Instructions:
- (1) constant pressure regulator potentiometer, the output voltage reaches the voltage value you want
- (2) 10A current with a multimeter measuring the output short circuit current file (directly to the two leads to the output can), while adjusting the constant current potentiometer allows the output current reaches a predetermined value of overcurrent protection. (Such as the current value of the multimeter displays 4A, then you can use the module to the maximum current 4A, 4A current to constant voltage constant current when the red light is on, otherwise the light off)
- Note: When used in this state, since the output of 0.05 ohm current sense resistor, there will be 0 ~ 0.3V voltage drop after connected to the load, this is normal! This drop is not being pulled down your load, but down-sampling resistor.
- 2. Use as a battery charger
- Module without constant function can not be used to charge the battery, since the end of the battery and charger power consumption big difference between charging current is too large, resulting in damage to the battery, so when you want to start the battery using a constant current charging, when charging to a certain extent automatically switches back to constant voltage charging.
- Instructions:
- (1) Make sure you need to recharge battery float voltage and charging current; (if lithium argument is 3.7V / 2200mAh, then float voltage is 4.2V, the maximum charging current 1C, namely 2200mA)
- (2) under no-load conditions, the multimeter to measure the output voltage of the constant voltage potentiometer to adjust the output voltage reaches the float voltage; (if rechargeable lithium battery to 3.7V, the output voltage can be adjusted to 4.2V)
- (3) 10A current with a multimeter measuring the output short circuit current file (directly to the two leads to the output can), while adjusting the constant current potentiometer allows the output current reaches a predetermined charge current value;
- (4) Charging turn lamp current default factory setting is 0.1 times the charging current; (the battery during charging current is gradually reduced, gradually converted to constant voltage charging by the constant current charging, if the charging current setting is 1A, then when Charge current is less than 0.1A when the blue light off, green light is on, then the battery is fully charged)
- (5) connected to the battery charge.
- (1,2,3,4 step is: input termination power, output unloaded battery is not connected)
- 3. Use a high-power LED constant current driver module
- (1) determine the work you need to drive the LED current and the maximum operating voltage;
- (2) No-load condition, the multimeter to measure the output voltage of the constant voltage potentiometer to adjust the output voltage reaches the LED maximum working voltage;
- (3) 10A current with a multimeter measuring the output short-circuit current gear while adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
- (4) connected to the LED, the test machine.
- (Steps 1 through 3 are: input connected to the power supply, the output load is not connected LED.)
- Note: This module is more than 3A, 35W in use, to enhance heat dissipation! ! !
1x 5A constant current LED driver module
If need more parts Pls click 
and submit the order.If you need more quantity,Pls contact us. If you mind the price,If some parts can not find out in my store,Pls contact us,we still have many parts don’t published.
We will send the latest version of product, the upgraded function. It may has different shape or color. If you can’t agree, pls don’t buy.
Please don’t open dispute and leave any bad feedback, if you have any question, feel free to contact us,we will give you satisfactory answer. Hope you understand us, thank you in advance.
When you place an order, please choose a shipping method and pay for the order including the shipping fee. We will send the items within 5 days once your payment is completed.
We do not uarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected. Please note that buyers are responsible for all additional customs fees, brokerage fees, duties, and taxes for importation into your country. These additional fees may be collected at time of delivery. We will not refund shipping charges for refused shipments.
The shipping cost does not include any import taxes, and buyers are responsible for customs duties.
All order will ship out in 1-5 buiness after payment verify .Pls wait in patient.
China Post mail is not fast , Usally need 15-60days arriived.If in urgent .Pls choose DHL/ Fedex/EMS.We can write low value for cutomer if in need!
China Post Ordinary Small Packet Plus just can track to the domestic of our country,but it not effect your receiving.
If you want your products and don’t want to waste your time, pls choose China Post Registered Air Mail. If you choose China Post Ordinary Small Packet Plus and the package is lost. We will prove you we send the package and we only can refound 50%. This is your choose, We all have to take risks. If you can’t agree, pls don’t buy.
China Post Ordinary Small Packet Plus and China Post Registered Air Mail all can track in www.17track.net/en/
We do our best to serve our customers the best that we can.
We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions. If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund. The buyer should try to file a claim with the logistic company to recover the cost of damage or loss.
The buyer will be responsible for the shipping fees to return the items.
We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions. If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund. The buyer should try to file a claim with the logistic company to recover the cost of damage or loss.
The buyer will be responsible for the shipping fees to return the items.
We offer the 1-month free replacement.Buyers may request for a replacement within 15 days from your receipt of the product. The buyer should return the product in the original conditions to us and should bear the shipping costs for return.
We also provide 12-month free maintenance. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.
Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP.
Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and services.
If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problems and provide you with the best customer service.
