T12 Soldering Station STC T12 D24 Digital Soldering Iron Station Electronic Welding Iron Tips Temperature Controller Solder Tool
Host size: 120 * 88 * 38MM
Board size: about 6.8 * 3 * 3.3CM, including encoder and buzzer height
Display Size: Common Cathode Digital Tube 0.36 “(Display color is blue, red, yellow and green)
Voltage and current: recommended 19 to 24V, current 3A or more
Temperature range: 150 to 465 degrees (recommended range of 300 to 380)
Sleep time: 1 to 255 minutes (recommended range 5 to 20 minutes)
Sleep temperature: 100 to 445 degrees (recommended range of 100 to 200 degrees)
Encoder step: 1 to 99 (recommended range 1 to 10)
Calibration parameters: If you need to correct, please adjust the CAL with the thermometer, adjust the speed not too fast,
Automatic warming: welding station will be in response to large solder joints, to strengthen the solder joint temperature to rapid heating
Room temperature detection: detection of room temperature, so that the temperature is accurate, good welding effect
Instructions for use: points A1, A2, A3 three functions:
A1, sleep temperature, turn on the state will continue to press the next two will show A1, and then press the button will show the value of A1, rotary encoder can add or subtract the value of the proposed general about two hundred.
A2: sleep time, set the sleep temperature and then press the button will show A2, and then press the button will show the sleep time, rotary encoder can add or subtract the value, it is recommended to adjust the general about five minutes.
A3, step value, set the sleep time and then short press will show A3, and then press the button will show the step value, that is, the encoder tune a grid of the value (such as the original is 300 degrees, step value is 5 , Rotating encoder is a grid is 305 degrees) recommended tune to 5,
We will set these parameters for the customer before shipment, of course, if you need to set their own value you want, you can modify the value you want, new listing, spend nearly a year to change the original reaction temperature is not sensitive, Temperature is not ideal, no buzzer tips, can not set their own sleep temperature, sleep time, and other issues, pro who use any do not understand do not understand, you can consult customer service!